Builder LL Backlit Bathroom Mirror - LL97C


  • The Builder LL Backlit Bathroom Mirror radiates style and vibrancy to your modern bathroom. Its backlit cool light effect emanates a glow to its surroundings.  

    • 90cm x 75cm x 4.5cm
    • Weighs 12 kgs
    • Low energy white LED lights 
    • Free demister included to maintain a fog-free mirror, with on/off switch
    • On/off IR sensor for lights function
    • Designed to be hard-wired by an electrician. Comes with an instruction manual for ease of installation
    • Horizontal mount only
    • Includes 1 year warranty
    • IP44 Protection rating (protected against objects >1mm like wires or screws, and water splashing against the enclosure from any direction shall have no harmful effect) 
    • FREE Shipping Australia Wide 

    All LED models include a 12 volt transformer in the unit and the fluorescent light models connect directly to 240 volt that guarantees compliance with Australian Standard.

    Wiring is through the centre of the metal back box of each mirror and this needs to be hard wired to a switch in the room either in the light switch panel or centre of the power point. 

    The thin demister pad included is adhered to the rear of the mirror and connected to the light switch or a movement sensor. It prevents condensation on the mirror and gives clear visibility even after a hot bath or shower. This self adhesive pad is only 0.4mm thick.

    Mirror Care and Maintenance

    For best results clean mirrors with methylated spirits and water at a rate of 30% methylated spirits and 70% water. Do not use Windex or similar chemical cleaning products.

    Avoid getting water on the sides or back of the mirror as damage to silver backing can occur.

    In coastal areas it is recommended to wipe around the edge of the mirror once a month to avoid salt build up that can cause silver creep.

    Do not place on a hard surface after opening as the mirror will chip.



    Click the red Add to Cart button on this page to add this item to your cart