Builder Web Backlit Bathroom Mirror- BW69C

  • These uniquely designed backlit mirrors have web-like border appearance to give its own character. Comes with an IR sensor, it greatly enhances the ambiance of the area.

    • 60cm x 90cm x 3.5cm
    • 12V transformer included
    • Infra-red (IR) sensor, automatically switches on/off the backlit light with detected movement
    • Uses white LED light for brightness
    • Able to display vertically or horizontally, to suit your preference
    • Designed to be hard-wired by an electrician. Comes with the instruction manual; easy to install
    • IP44 Protection rating (protected against objects >1mm like wires or screws, and water splashing against the enclosure from any direction shall have no harmful effect) 
    • FREE Shipping Australia Wide

     All LED models include a 12 volt transformer in the unit and the fluorescent light models connect directly to 240 volt that guarantees compliance with Australian Standard.

    The Builder backlit mirror units have the mirror and back box combined, and the LEDs and transformer are encapsulated inside. They are designed to be hard wired by an electrician but can be fitted with a 3 pin plug if required.  

    Mirror Care and Maintenance

    For best results clean mirrors with methylated spirits and water at a rate of 30% methylated spirits and 70% water. Do not use Windex or similar chemical cleaning products.

    Avoid getting water on the sides or back of the mirror as damage to silver backing can occur.

    In coastal areas it is recommended to wipe around the edge of the mirror once a month to avoid salt build up that can cause silver creep.

    Do not place on a hard surface after opening as the mirror will chip.

    Click the red Add to Cart button on this page to add this item to your cart